Phase-Locked Oscillator, Phase-Locked Loop, Digitally-Tuned Oscillator, Dielectric Resonator Oscillator
Phase Locked Oscillators
Need a frequency that isn’t a direct multiple of 10 or 100 MHz?
Our integer/fractional PLL circuitry solves this problem, enabling us to provide exact frequencies with precision down to the MHz, kHz and below. So specify any frequency you need – we’ll do our best to provide it. Syntonic Microwave’s Phase-Locked Oscillators (PLOs) operate at fixed frequencies up to 26 GHz.
An all-in-one solution, with integrated PLO, AMP and TCXO.
The CG-Series comb generator provides flattened pickets up through 26 GHz. TTL logic is used to put the products in “stand by” mode when not in use. This greatly reduces power consumption and heat, which makes the device particularly useful as a calibration source or for Built-In Test (BIT) applications. During “stand by” mode, the device draws only 30 mA.
|Model||Oscillator||Freq Range||Picket Spacing||Reference|
|CG-0750 (PDF)||PLL-VCO||0.75-18 GHz||750 MHz||Internal|
|CG-0751 (PDF)||PLL-VCO||0.75-26 GHz||750 MHz||Internal|
|CG-1000 (PDF)||PLL-VCO||1-18 GHz||1000 MHz||Internal|
|CG-1001 (PDF)||PLL-VCO||1-26 GHz||1000 MHz||Internal|
|CG-1002 (PDF)||PLL-VCO||1-26 GHz||1000 MHz||External|
Precision and repeatability for long-term reliability.
At Syntonic Microwave we provide Digitally-Tuned Oscillators (DTOs) in Octave bandwidths. This provides analog tuning steps across the entire tuning range. Unlike legacy DTOs that required precision heater-stabilization, our fully digital design provides the precision and repeatability necessary to assure outstanding long term field reliability without the need for frequent recalibration that plagued legacy designs.